Add an Additional Disk Drive to Your Linux Server or VM and and partitioning it

Prerequisite: This tutorial covers adding a new disk drive to your linux computer. First it is assumed that the hard drive was physically added to your system.

IDE based systems, can support two drives on each ribbon cable. The cable is attached to either the Primary or Secondary IDE controller. A “jumper” is pressed onto two pins (thus connecting the two pins) on the drive to define the drive as a “Master” or a “Slave” drive. Each cable can support one master and one slave drive. Typically new desktop systems have one hard drive connected as a Master on the Primary controller and one CD-Rom on the second cable configured as a master. Continue reading Add an Additional Disk Drive to Your Linux Server or VM and and partitioning it